Return on equity (ROE) is a closely-watched number among knowledgeable investors. It is a strong measure of how well a company's management creates value for its shareholders. The number can be misleading, however, as it is vulnerable to measures that increase its value while also making the stock riskier. Without a way of breaking down ROE components, investors could be duped into believing a company is a good investment when it's not. Read on to learn how to use DuPont analysis to break apart ROE and聽gain a much better understanding of where movements in ROE are coming from.

Key Takeaways

  • DuPont analysis is a framework for analyzing fundamental performance originally popularized by the DuPont Corporation, now widely used to compare the operational efficiency of two similar firms.
  • DuPont analysis is a useful technique used to decompose the different drivers of return on equity (ROE).聽
  • There are two versions of DuPont analysis, one utilizing decomposing it into 3 steps and another 5 steps.
1:41

DuPont Analysis

Return on Equity (ROE)

The beauty of ROE is that it is an important measure that only requires two numbers to compute: net income and shareholders' equity.

ROE=Net聽IncomeShareholder聽Equity\begin{aligned} &\text{ROE} = \frac{ \text{Net Income} }{ \text{Shareholder Equity} } \\ \end{aligned}ROE=Shareholder聽EquityNet聽Income

If this number goes up, it is generally a good sign for the company as it is showing that the rate of return on the shareholders' equity is rising. The problem is that this number can also increase simply when the company takes on more debt, thereby decreasing shareholder equity. This would increase the company's聽leverage, which could be a good thing, but it will also make the stock riskier.

Three-Step DuPont

A more in-depth knowledge of ROE is necessary to avoid mistaken assumptions. In the 1920s, the DuPont corporation created an analysis聽method that fills this need by breaking down ROE into a more complex equation. DuPont analysis shows the causes of shifts in the number.

There are two variants of DuPont analysis: the original three-step equation, and an extended five-step equation. The three-step equation breaks up ROE into three very important components:

ROE=NPMAsset聽TurnoverEquity聽Multiplierwhere:NPM=Net聽profit聽margin,聽the聽measure聽of聽operatingefficiencyAsset聽Turnover=Measure聽of聽asset聽use聽efficiencyEquity聽Multiplier=Measure聽of聽financial聽leverage\begin{aligned} &\text{ROE} = \text{NPM} \times \text{Asset Turnover} \times \text{Equity Multiplier} \\ &\textbf{where:} \\ &\text{NPM} = \text{Net profit margin, the measure of operating} \\ &\text{efficiency} \\ &\text{Asset Turnover} = \text{Measure of asset use efficiency} \\ &\text{Equity Multiplier} = \text{Measure of financial leverage} \\ \end{aligned}ROE=NPMAsset聽TurnoverEquity聽Multiplierwhere:NPM=Net聽profit聽margin,聽the聽measure聽of聽operatingefficiencyAsset聽Turnover=Measure聽of聽asset聽use聽efficiencyEquity聽Multiplier=Measure聽of聽financial聽leverage

The Three-Step DuPont Calculation

Taking the ROE equation: ROE = net income / shareholder's equity and multiplying the equation by (sales / sales), we get:

ROE=Net聽IncomeSalesSalesShareholders鈥櫬燛quity\begin{aligned} &\text{ROE} = \frac{ \text{Net Income} }{ \text{Sales} } \times \frac{ \text{Sales} }{ \text{Shareholders' Equity} } \\ \end{aligned}ROE=SalesNet聽IncomeShareholders鈥櫬燛quitySales

We now have ROE broken into two components: the first is net profit margin and the second is the equity turnover ratio. Now by multiplying in (assets / assets), we end up with the three-step DuPont identity:

ROE=Net聽IncomeSalesSalesAssetsAssetsShareholders鈥櫬燛quity\begin{aligned} &\text{ROE} = \frac{ \text{Net Income} }{ \text{Sales} } \times \frac{ \text{Sales} }{ \text{Assets} } \times \frac{ \text{Assets} }{ \text{Shareholders' Equity} } \\ \end{aligned}ROE=SalesNet聽IncomeAssetsSalesShareholders鈥櫬燛quityAssets

This equation for ROE breaks it into three widely used and studied components:

ROE=NPMAsset聽TurnoverEquity聽Multiplier\begin{aligned} &\text{ROE} = \text{NPM} \times \text{Asset Turnover} \times \text{Equity Multiplier} \\ \end{aligned}ROE=NPMAsset聽TurnoverEquity聽Multiplier

We have ROE broken down into net profit margin (how much profit the company gets out of its revenues), asset turnover (how effectively the company makes use of its assets) and equity multiplier (a measure of how much the company is leveraged). The usefulness should now be clearer.

If a company's ROE goes up due to an increase in the net profit margin or asset turnover, this is a very positive sign for the company. However, if the equity multiplier is the source of the rise, and the company was already appropriately leveraged, this is simply making things riskier. If the company is getting over-leveraged, the stock might deserve more of a discount despite the rise in ROE. The company could be under-leveraged as well. In this case, it could be positive and show that the company is managing itself better.

Even if a company's ROE has remained unchanged, examination in this way can be very helpful. Suppose a company releases numbers and ROE is unchanged. Examination with DuPont analysis could show that both net profit margin and asset turnover decreased, two negative signs for the company, and the only reason ROE stayed the same was a large increase in leverage. No matter what the initial situation of the company, this would be a bad sign.

Five-Step DuPont

The five-step, or extended, DuPont equation breaks down net profit margin further. From the three-step equation we saw that, in general, rises in the net profit margin, asset turnover and leverage will increase ROE. The five-step equation shows that increases in leverage don't always indicate an increase in ROE.

The Five-Step Calculation

Since the numerator of the net profit margin is net income, this can be made into earnings before taxes (EBT) by multiplying the three-step equation by 1 minus the company's tax rate:

ROE=EBTSSAAE(1TR)where:EBT=Earnings聽before聽taxS=SalesA=AssetsE=EquityTR=Tax聽rate\begin{aligned} &\text{ROE} = \frac{ \text{EBT} }{ \text{S} } \times \frac{ \text{S} }{ \text{A} } \times \frac{ \text{A} }{ \text{E} } \times ( 1 - \text{TR} ) \\ &\textbf{where:} \\ &\text{EBT} = \text{Earnings before tax} \\ &\text{S} = \text{Sales} \\ &\text{A} = \text{Assets} \\ &\text{E} = \text{Equity} \\ &\text{TR} = \text{Tax rate} \\ \end{aligned}ROE=SEBTASEA(1TR)where:EBT=Earnings聽before聽taxS=SalesA=AssetsE=EquityTR=Tax聽rate

We can break this down one more time since earnings before taxes is simply earnings before interest and taxes (EBIT) minus the company's interest expense. So, if there is a substitution for the interest expense, we get:

ROE=(EBITSSAIEA)AE(1TR)where:IE=Interest聽expense\begin{aligned} &\text{ROE} = \left ( \frac{ \text{EBIT} }{ \text{S} } \times \frac{ \text{S} }{ \text{A} } - \frac{ \text{IE} }{ \text{A} } \right ) \times \frac{ \text{A} }{ \text{E} } \times ( 1 - \text{TR} ) \\ &\textbf{where:} \\ &\text{IE} = \text{Interest expense} \\ \end{aligned}ROE=(SEBITASAIE)EA(1TR)where:IE=Interest聽expense

The practicality of this breakdown is not as clear as the three-step, but this identity provides us with:

ROE=(OPMATIER)EMTRRwhere:OPM=Operating聽profit聽marginAT=Asset聽turnoverIER=Interest聽expense聽rateEM=Equity聽multiplierTRR=Tax聽retention聽rate\begin{aligned} &\text{ROE} = ( \text{OPM} \times \text{AT} - \text{IER} ) \times \text{EM} \times \text{TRR} \\ &\textbf{where:} \\ &\text{OPM} = \text{Operating profit margin} \\ &\text{AT} = \text{Asset turnover} \\ &\text{IER} = \text{Interest expense rate} \\ &\text{EM} = \text{Equity multiplier} \\ &\text{TRR} = \text{Tax retention rate} \\ \end{aligned}ROE=(OPMATIER)EMTRRwhere:OPM=Operating聽profit聽marginAT=Asset聽turnoverIER=Interest聽expense聽rateEM=Equity聽multiplierTRR=Tax聽retention聽rate

If the company has a high borrowing cost, its interest expenses on more debt could mute the positive effects of the leverage.

Learn the Cause Behind the Effect

Both the three- and five-step equations provide a deeper understanding of a company's ROE by examining what is changing in a company rather than looking at one simple ratio. As always with financial statement ratios, they should be examined against the company's history and its competitors.

For example, when looking at two peer companies, one may have a lower ROE. With the five-step equation, you can see if this is lower because: creditors perceive the company as riskier and charge it higher interest, the company is poorly managed and has leverage that is too low, or the company has higher costs that decrease its operating profit margin. Identifying sources like these leads to better knowledge of the company and how it should be valued.

The Bottom Line

A simple calculation of ROE may be easy and tell quite a bit, but it does not provide the whole picture. If a company's ROE is lower than its peers, the three- or five-step identities can help show where the company is lagging. It can also shed light on how a company is lifting or propping up its ROE. DuPont analysis helps significantly broaden understanding of ROE.