The Phu My power complex is the largest group of power generation plants in Vietnam, with a combined capacity of up to 3,900MW.
DEKOMTE manufactures and supplies fabric and metal expansion joints as well as corrugated hoses and accessories. The emphasis of the product range is on fabric expansion joints. We have several patents and numerous in-house developments in this area. Quality processing appropriate to the material being used guarantees the highest reliability. If required, DEKOMTE can offer complete project planning for expansion joints including selection of components and optimum design as a specialised engineering service. Afterwards, the proven DEKOMTE service team is available to you at any time. It will help you in case of minor problems as well as with the rapid and problem-free replacement of complete expansion joints.
FABRIC EXPANSION JOINTS – GASEOUS MEDIA, SUCH AS AIR, EXHAUST GASES OR SOLVENT FUMES
DEKOMTE supplies quality fabric expansion joints. Many different materials of the highest quality are used for this. In principle, fabric expansion joints are best for gaseous media, such as air, exhaust gases or solvent fumes, for operation below the dew point (also with a percentage of acids) and for abrasive exhaust gases (e.g. containing coal dust). Fireproof expansion joints at ducts through walls and ceilings with fire-protection requirements withstand flames for 90mins and more in accordance with DIN 4102.
Only quality processing appropriate to the material being used guarantees the highest reliability. For example, the nuclear power sector has strict regulatory requirements. DEKOMTE has the required certificates for radiation resistant materials. If required, DEKOMTE can offer project planning for expansion joints including selection of components and optimum design as a specialised engineering service. Furthermore, the proven DEKOMTE customer service is always available. DEKOMTE will help you in case of unexpected problems as well as with the rapid replacement of complete expansion joints.
STEEL EXPANSION JOINTS – PIPELINE TECHNOLOGY
Metal expansion joints are indispensable elements for pipeline technology. They are used to compensate for changes in length, which arise in pipelines from temperature differences. In addition, they are able to absorb vibrations arising from pumps, motors, compressors or turbines. Axial, lateral or angular movements can be compensated depending on the specific situation, and we are happy to advise you on the best type of compensation.
DEKOMTE stainless steel expansion joints are manufactured of single-walled or multi-walled bellows. The standard designs listed in the following tables provide an overview of our range and can aid you in your design considerations. However, we would recommend that you provide us with detailed information on each individual use as we can then technically optimise the possible expansion joints taking account of movements, pressure, temperature etc. which usually leads to lower costs as well.
CORRUGATED HOSES – ALL-LIQUID AND GASEOUS MEDIA
DEKOMTE corrugated hoses can be used for practically all-liquid and gaseous media as well as pumpable solids. Our corrugated hoses are manufactured from butt-welded stainless steel pipe, which has been corrugated by cold forming with the most up-to-date procedure. One or two braidings with stainless steel wire provide for appropriate pressure resistance and external mechanical protection.
PLANNING AND INSTALLATION
If required, we can offer complete project planning from the initial sketch to maintenance of the expansion joint as a specialised engineering service. DEKOMTE is DIN EN ISO 9001 and RAL registered.
The firm of DEKOMTE de Temple Kompensator-Technik GmbH was founded at a time when the requirements on expansion joints were rising to an unprecedented degree. In 1978 the company’s founder, Günther de Temple, continued a family tradition under the motto "from regulator to expansion joint" as the de Temple name had already been associated with reliable steam engine regulators since 1890. Today, the name of DEKOMTE de Temple stands for high-tech expansion joint technology.
The Taweelah A1 is a gas-fired electricity and desalination plant with a total gross power output of 1,672.5MW and 84.8 million imperial gallons a day (MIG / day) of water desalination capacity.
Alinta's natural-gas-fired cogeneration facility is located in Alcoa's Pinjarra Alumina Refinery in Western Australia. The A$300m facility was built in two stages.
DEKOMTE UK is part of a worldwide privately owned group, specialising in expansion joint technology for power stations. The products are manufactured in the central European productions sites, and delivered to our customers around Europe. DEKOMTE UK is responsible for providing all customer suppo
In September, DEKOMTE were invited to the annual conference of the CFE Station Managers Conference. CFE is the state owned power utility company in Mexico, owning 75% of the countries generation capacity. The seminar at the conference focused on the problems many power stations have wit
In the ducting framework of fluidized bed plants there have been many problems caused by the fabric expansion joints, which have lead to expensive modifications and repairs regularly required. The expansion joints have been lasting only a few months, before failing and causing distortion to the d
26-28 July 2006 Marriott Hotel Singapore DEKOMTE de Temple Kompensatortechnik GmbH will be represented by its managing director Dr. Ulrich Stoehrer. His speech will be on the 26th of July 2.45pm. The topic of his speech is: "Recognise the Value of Expansi
On the 19th of November 2005 DEKOMTE de Temple Kompensatortechnik GmbH is hosting an expansion joint symposium to cross section of delegates from the oil and gas and power generation market of Saudi Arabia. The venue will be at the Crowne Plaza Hotel in the strategic seaport of Jeddah (Saudi Arab